หน้าแรก > Industrial Sectional Door > Dock Shelter > DOCK SHELTERS WITH COLLAPSIBLE STRUCTURE

DOCK SHELTERS WITH COLLAPSIBLE STRUCTURE

Tags: dock shelters, อุโมงค์โหลดสินค้า

  DOCK SHELTERS WITH COLLAPSIBLE STRUCTURE

      Dock Shelter with collapsible aluminum frame of D.SH-RT series, is a classic option for use in areas with average traffic intensity. 

PVC material of which the front sheets are made, possesses elasticity, is wear resistant and high tear resistant. 

During the loading and unloading operations, the top and vertical side sheets fit the vehicle body providing the necessary tightness.

 In case of incorrect vehicle parking to the dock, the front frame folds, thanks to the struts and after the work is complete, 

returns automatically to its original position. The dock is installed using the overlaid method of installation.

Main advantages: 

  • folding aluminum construction;
  • the dock shelter topsheet can be either single or double — to provide better contact with the vehicle body;
  • built-in springs allow the front folding frame to follow the vehicle body, preventing damage to the structure (in the case of incorrect vehicle parking);                                                                                 
  •  white reflective stripes located in front of the vertical sheets provide an accurate vehicle parking.

  • Characteristics  

       Dimensions/specifications
    Width, mm 3000/3200/3400 
    Height, mm 3000/3200/3400/4400
    Top sheet
    • Standard Single
    • On request Double
    Profile colour White aluminum (RAL 9006)

     
     
    Technical specifications
    Front fabric — PVC
    Tear resistance in length more than 550 N
    Tear resistance in width more than 900 N
    Tear strength limit 250 N/mm
    Metal friction coefficient 0,3 
    PVC friction coefficient 0,4
    Thickness 3 mm
    Specific weight 3,6 kg/m
    Operating temperature from -35 to +90 °С
    Side fabric — PVC
    Tear resistance 250 N
    Thickness 0,5 mm
    Specific weight 0,7 kg/m
    Operating temperature from -35 to +70 °С
    Aluminum frame
    Rear frame profiles dimension 50x44 mm
    Front frame profiles dimension 45х44 mm
    Brace dimensions 50x25x2,5 mm
    Front clamping plate dimensions 34x4,8 mm
     
     
     
     Weight
    Article Weight, kg
    D.SH-RT 3,0x3,0  83,5
    D.SH-RT 3,0x3,2  86
    D.SH-RT 3,0x3,4 89,5
    D.SH-RT 3,0x4,4 107
    D.SH-RT 3,2x3,0 86
    D.SH-RT 3,2x3,2 89
    D.SH-RT 3,2x3,4 93
    D.SH-RT 3,2x4,4 107
    D.SH-RT 3,2x4,4 89,5
    D.SH-RT 3,4x3,2 93
    D.SH-RT 3,4x3,4 94,6
    D.SH-RT 3,4x4,4 113

  •  

  •     Construction

  •      

           1.  Upper front sheet
          2.  Side front sheet
          3.  Brace
          4.  Spring
          5.  Integral stocking with water flow system 
          6.  White reflective
          7.   Harness rubber

      Dock Shelters of D.SH-RT series, consist of front and rear frames made of aluminum profiles which are connected to each other by braces. 

  At the connection a cable is installed with a spring to provide the necessary elasticity of the structure.

  Front and upper side sheets are made of PVC and reinforced with two layers of polyester. The top sheet has special cuts for a tighter fit to the car body.

  Vertical front sheets have white reflective stripes, which ease the car parking. Side and top "sleeves" are made of a material which has a layer of synthetic reinforcement.

 

     Configuration and accessories

 
                                                                 Standard                      Standard
      Dock Shelter depth 600 mm 900 mm
      Top sheet Single Double
      Profiles colour             White aluminum (RAL 9006)   Other, on request
      Sealing                                                                                Small / big corner cushions on the bottom